Initial microstructure of TC11 alloy
Figure 2. Deformed specimens of TC11 alloy
Flow curves of TC11 alloy.
Initial (a) and deformed (b) ring specimens of TC11 alloy
Temperature dependence of friction factor of TC11 alloy
Finite element model (a) and the photo of forged part, a “lever” (b.)
The sequence of forming process of the part, a lever.
The scheme of crosscut sections in the part, a lever.
Typical microstructure (a) after upsetting (Section 1), macrograph (b) and typical microstructure (c) after preforming (Section 2).
Macrograph and typical microstructure after final forming (Section 3).
Macrograph and typical microstructure after final forming (Section 4).
Recrystallized volume fraction of α-phase.